This clutch cable is suitable for fitment on the 4-spring clutch Triumph TR25W single-cylinder model from 1968. Similar in dimensions to the 60-2083 clutch cable, it may be applicable to some BSA single-cylinder models as well.
Made in the US by Barnett, this premium quality cable features alloy shouldered ferrules and a friction-reducing nylon lining for easy operation and longevity. A barrel adjuster and lock nut are also included with this cable. Overall length measures 52-3/4″, sheath length is 48″, with an inner wire free length of 3″.
The integrity of the clutch cable is critical to the operation of the clutch assembly, as it is the link between the handlebar control lever and the clutch actuator. When the control lever is pulled in, the cable pulls the clutch operating arm in to push the clutch pushrod against the pressure plate, disengaging the clutch assembly.
The barrel end of the cable is located at the handlebar control lever with the slotted adjuster barrel turned fully inward, allowing maximum free wire length. The nipple-end of the cable is captured by the clutch operating arm. Once fitted, the cable adjustment can be restored with the barrel adjuster and lock nut on the control lever. A light smear of lubricant to the swivel and nipple on the ends of the cable is advisable. Review the installation intructions in the workshop manual for more details.