This clutch cable is suitable for use on the 1969-1972 BSA A75 and 1969-1972 Triumph T150 3-cylinder models. This cable is particularly suited for the models with the lower “Western” handlebars.
Made in the US by Barnett, this premium quality cable features alloy shouldered ferrules and a friction-reducing nylon lining for easy operation and longevity. Overall length measures 57-3/4″, sheath length is 51″, with an inner wire free length of 6″.
The Borg & Beck automotive-style clutch assembly fitted to the BSA A75 and Triumph T150 models requires a robust cable to optimize performance and longevity. The cable actuates a rotary clutch lever which rides on a bearing. When the control lever is pulled in at the handlebar control, the inner thrust plate separates the clutch plates and the clutch release pull rod pulls the pressure plate outwards, compressing the diaphragm spring and freeing the driven plate.Â
The barrel end of the cable is located at the handlebar control lever with the slotted adjuster barrel turned fully inward, allowing maximum free wire length. The pear-shaped end of the cable passes through a threaded adjuster and cable abutment on the outer primary cover. The cable end is captured by the rotary clutch lever. A rubber cap is fitted to the cable to protect the inner primary and clutch components from contamination. Review the installation instructions in the workshop manual for more details.
Fitment: BSA A75-1969-1972, Triumph T150 1969-1972
Reviews
There are no reviews yet.