This clutch cable is suitable for use on the US-market 1960-1962 Triumph 650 models, fitted with the 30″ wide handlebars. Supplied without the slotted swivel for fitment to the clutch control lever. (Available separately under part number TBS-24558.)
Made in the US by Barnett, this premium quality cable features alloy shouldered ferrules and a friction-reducing nylon lining for easy operation and longevity. Overall length measures 72″, sheath length is 66″, with an inner wire free length of 5-1/4″.
The integrity of the clutch cable is critical to the operation of the clutch assembly, as it is the link between the handlebar control lever and the clutch actuator. When the control lever is pulled in, the cable pulls the clutch operating arm in to push the clutch pushrod against the pressure plate, disengaging the clutch assembly.
The barrel end of the cable is located at the handlebar control lever with the slotted adjuster barrel turned fully inward, allowing maximum free wire length. The nipple-end of the cable is captured by the clutch operating arm. Once fitted, the cable adjustment can be restored with the barrel adjuster and lock nut on the control lever. A light smear of lubricant to the swivel and nipple on the ends of the cable is advisable. It is likely the clutch pushrod will require adjustment after the cable is installed.
Reviews
There are no reviews yet.