This economy clutch cable is suitable for use on the 1970-1972 BSA twins with original stock handlebars and revised Triumph-style clutch actuator.
Emgo reproduction cables are supplied in original lengths for stock vintage British motorcycles and are ideal for those on a budget. The overall length is approximately 54″, with a sheath length of 49-1/4″ (including the adjuster), and an inner wire free length of 4-1/2″. A rubber boot for the adjuster cover is supplied with the cable.
The cable is the link between the control lever on the handlebar and the clutch actuator inside the outer gearbox cover. When the control lever is pulled in, the cable pulls the clutch actuator operating arm upward, disengaging the clutch to allow gear selection. It is important that the length of the cable is correct for the application.
The inspection cap on the outer timing cover is removed to allow access to the end of the cable where it is captured by the fork on the operating arm. Once the adjusters on the control lever and the gearbox end of the cable are fully collapsed, enough free inner wire will allow the cable end to be removed from the operating lever. It is advisable to pay close attention to the routing of the cable to avoid adding unnecessary friction to the movement of the inner wire.
We also stock a Barnett version of this cable – absolutely the best available! Click here.
And cables for 1962-69 BSA models click here.
Reviews
There are no reviews yet.