Click here to return to the Tech Blog page.
Lacing a Cross 3 Pattern Rear Disc Wheel A note about Lacing a Cross 3 Pattern Rear Disc Wheel: Your new rim may not lace up in the same pattern of your existing rim. For example, the Triumph disc rear from the factory used a couple of different dimple patterns of their rims, some used […]
Process Guide: Lacing a Cross 3 Pattern Rear Disc Wheel Read More »
Considerations for Handlebar Changes By Mike Grage, Technical and Customer Support at The Bonneville Shop and British Iron. Most people in the motorcycle world want to make their bike their own by customizing it to their liking and riding comfort. One of the most common ways of doing this is to change the handlebars to
Handlebar Changes and cables Read More »
From Guest Expert: Don Johnson To use an o ring with the gearbox sprocket you must have a high gear spline grooved for the o ring as well as the chamfered sprocket. Oring will demand the correct locking washer for nut. If spline is grooved put sealant on sprocket splines. Push on sprocket, install o
Gearbox Sprocket: Tips for a Grooved High Gear Spine and Chamfered Sprocket Read More »
130 Link 530 Chains By Dave Porter, Technical and Customer Support at The Bonneville Shop We recently procured a substantial quantity of extra-long 130 link 3/8” x 5/8” 530 drive chains from DID and there are several reasons why you should consider this chain for your BSA, Norton, or Triumph motorcycle when replacing your
Get ‘em While They’re Hot- 130 Link 530 Chains! Read More »
…it is, without making some adjustments. In other words, the part is not in a “state of fine fettle”, which by definition means the state of condition the part needs…
Pattern Parts and Fettling to Perfection Read More »
So, you bought a TBS-0002 Classic Tri-Spark Triples Ignition kit and you’re having a tough time wiring it up and/or setting the timing. Well don’t worry, I got your back. This ignition system is a little different, but in a good way. This is the Tri-Spark triples ignition system I will use if I build
Easy Tri-Spark Triples Ignition Kit Installation Guide Read More »
By Dave Porter, Technical and Customer Support at The Bonneville Shop We have recently taken delivery and sold through our initial shipment of Girling’s new 37-4275G Stainless Floating Brake Disc Rotor. The reception in the marketplace has been favorable and the increased performance characteristics of the nearly 2 lbs. of rotational weight savings have been
Tips on Fitting the Girling Stainless Floating Brake Disc Rotor Read More »
Using headlight fixing clips are easier to use than you might think. There are many incorrect ways to install the fixing wires to retain a Lucas or Lucas type headlight reflector and lens in a Lucas headlight shell, but only one correct way. Today we will show you how to do so. Installing Lucas Headlight
VIDEO: Installing a Headlight with Fixing Clips Read More »
Installing a mainstand on your bike? Here’s a easy way that doesn’t require a friend or using pullers!
VIDEO: Installing a Mainstand – The Penny Trick Read More »