Click here to return to the Tech Blog page.
From Guest Expert: Don Johnson To use an o ring with the gearbox sprocket you must have a high gear spline grooved for the o ring as well as the chamfered sprocket. Oring will demand the correct locking washer for nut. If spline is grooved put sealant on sprocket splines. Push on sprocket, install o […]
Gearbox Sprocket: Tips for a Grooved High Gear Spine and Chamfered Sprocket Read More »
130 Link 530 Chains By Dave Porter, Customer and Technical Support at The Bonneville Shop We recently procured a substantial quantity of extra-long 130 link 3/8” x 5/8” 530 drive chains from DID and there are several reasons why you should consider this chain for your BSA, Norton, or Triumph motorcycle when replacing your
Get ‘em While They’re Hot- 130 Link 530 Chains! Read More »
…the frame. Once the hardware was installed loosely, I fitted the top bridge to the shock mounting bolts, then loosely installed the nuts and bolts from the underside of the…
Pattern Parts and Fettling to Perfection Read More »
So, you bought a TBS-0002 Classic Tri-Spark Triples Ignition kit and you’re having a tough time wiring it up and/or setting the timing. Well don’t worry, I got your back. This ignition system is a little different, but in a good way. This is the Tri-Spark triples ignition system I will use if I build
Easy Tri-Spark Triples Ignition Kit Installation Guide Read More »
We have recently taken delivery and sold through our initial shipment of Girling’s new 37-4275G Stainless Floating Brake Disc Rotor. The reception in the marketplace has been favorable and the increased performance characteristics of the nearly 2 lbs. of rotational weight savings have been reported on various social media sites and forums. Specs The beefy
Tips on Fitting the Girling Stainless Floating Brake Disc Rotor Read More »
…bike on the road for years to come! If you have questions about any classic British spares, don’t hesitate to give us a call: 720-570-7884, text: 720-260-4271 or email: orders@thebonnevilleshop.com…
VIDEO: Installing a Headlight with Fixing Clips Read More »
Installing a mainstand on your bike? Here’s a easy way that doesn’t require a friend or using pullers!
VIDEO: Installing a Mainstand – The Penny Trick Read More »