The Nuts and Bolts of Vintage British Motorcycle Hardware

Restore your classic British motorcycle to its original glory with our extensive selection of vintage hardware. From nuts and bolts to clamps and fasteners, we have all the authentic pieces to properly reassemble and maintain legendary marques like Triumph, Norton, BSA and more.

Given the array of thread forms on vintage British motorcycle hardware, it merits a short explanation of what to watch for when replacing hardware.

Of course, a factory parts catalog is an absolutely essential guide for ordering hardware, or any part for that matter when undertaking a refurbishment of a vintage BSA, Norton, or Triumph motorcycle. 

Fasteners & Fittings for Triumph Norton BSA Hardware

There were a number of common thread types used over the years until the late-1970s, when it was almost completely standardized to Unified threads on nuts, bolts, and studs. Let’s take a brief look at the fasteners used on post-war machines.

British Standard Whitworth (BSW)

BSW is a coarse thread with a 55 degree included angle. Often found on fasteners that are threaded into an aluminum casting, such as early cylinder base studs. By the late 1950s, Whitworth threads were largely phased out of use on the common British motorcycles.

Cycle Engineers Institute (CEI)

CEI is a fine thread with a 60 degree included angle. This thread form was used on the majority of fasteners on British motorcycles until the late 1960s. Also referred to as British Standard Cycle (BSC), or simply “cycle thread”, these nuts and bolts require Whitworth spanners and sockets for fastening and loosening and are often mistakenly referred to as Whitworth.

British Standard Fine (BSF)

BSF is also a fine thread, similar to CEI, but with a 55 degree included angle. BSF screws were often used as case cover screws in machines from the 1950s and 1960s.

British Association (BA)

BA threads are used for screws, bolts, and nuts ¼” and less in diameter, as found on electrical switches and other light-duty applications.

Unified National Coarse (UNC) and Unified National Fine (UNF)

UNC and UNF are threads with a 60 degree included angle and are known as SAE or American threads. These fasteners started making their way onto British motorcycles starting with the 1967 model year, and transitioning all the way until the mid-1970s, when the majority of fasteners were UNC and UNF.

 

Here at The Bonneville Shop, we are committed to providing the necessary hardware to complete the refurbishment of your Triumph motorcycle. We offer a number of kits containing the necessary hardware for engine-to-frame installation, as well as cylinder head bolts, case cover screw sets, and many more.

Most recently, we have updated many of our hardware-related products by including variable quantities available for a given part number. For example, the 14-1304 7/16 x 20 TPI Cleveloc nut is now available in multiple quantities of Single, Four, or Ten, with significant pricing advantages when purchased in quantity. By emphasizing hardware, we are committed to the details of safety and the preservation of vintage British motorcycles.

As a hardware geeks, we are dedicated to making those bags of hardware the first thing to inspect when opening the box of parts from your supplier. Washers & Spacers
Don’t overlook the little things that keep your vintage British bike tight and rattle-free. Our washers and spacers come in the proper dimensions and materials to fit both engine and chassis components. From lock washers to wave washers, we have what you need to get that perfect fit.

Clamps & Clips for Triumph Norton BSA Hardware

Secure cables, hoses and wiring the way the factory intended with our wide range of clamps and clips. Fuel line, oil line, brake line – we have the correct vintage clamps in steel, aluminum and rubber-lined varieties. Plus clips for routing wires along the frame and handlebars cleanly.

Specialty Hardware

From fork damper rods to footpeg rubbers, we go the extra mile to stock the most obscure vintage British motorcycle hardware. Handlebar end weights, wheel spoke washers, kickstarter springs – you name it, we have the genuine article for a factory-correct restoration.

Don’t cut corners on your vintage British bike restoration. With our huge selection of authentic nuts, bolts, clamps, fasteners and specialty hardware, you can reassemble it right down to the smallest detail. That’s the key to keeping these classic machines running beautifully for years to come.

Showing 1–12 of 254 results

Scroll to Top

Shop By Vehicle