Triumph 650 750 TR6 TR7 Throttle Cable 1971-1977 Barnett PN# 60-1806 B D1806

Description

Properly sized throttle cables are essential for safe and correct adjustments to the throttle and carburetor. This throttle cable is suitable for the US-specification Triumph 650 and 750 models with a single Amal 930 Concentric carburetor and Western-bend or high handlebars. This listing is for (1) cable.

This premium-quality cable from Barnett features a long inline adjuster, correct top hat ferrule at the carburetor end, and a friction-reducing nylon lining for easy operation and longevity. Overall length is approximately 50″, sheath length is 45-3/4″, with an inner wire free length of 3-3/4″. Made in the US.

The cable is pulled by the motion of the twist grip, allowing it to raise and lower the throttle slide in the carburetor. Fine adjustments to cable lash are made by the inline barrel adjuster on the cable.

The carburetor top cap must be removed to thread the cable through the top cap. The return spring is installed over the cable, then the cable is captured in the throttle slide. The needle and clip are dropped in the slide bottom, with the return spring compressed so it is out of the way. The twist grip body must be separated to access the rotor, which pulls the end of the cable.