The kickstarter pawl is important to the function of the kickstart mechanism. They are often worn and can contribute to poor engagement of the kickstart spindle with the low gear in the transmission.
This is a new kickstarter pawl and fits Triumph 350 and 500 unit twins (Daytona, T100R, T100C, Tiger, T90, 3TA, etc) from 1957-1974.
The pawl hinges on the radiused end of the kickstart spindle and engages with the notches inside the low gear. The pawl is held in place with a small spring and acts as a ratchet mechanism.
While it turns the transmission layshaft when the kickstart lever is pushed down, it then lays down when the lever reaches its limit to return the kickstart lever to its original position.
It is held in place with a small spring and plunger in the inner end of the kickstart spindle, fitting into the recess of the low gear.
Pawl is sold individually.
Check your parts book to ensure the best fitment.
You may also like…
Triumph 350 500 Kickstart Return Spring Stop Plate (1) PN# 57-1422 T1422$14.95 Add to Cart
Triumph 350 500 T90 T100 Kickstarter Return Spring (1) 1959-74 PN# 57-1441 T1441$13.95 Add to Cart
Triumph 350 500 T90 T100C T100R Kickstart Layshaft Needle Bearing (1) 1969-74 PN# 57-1897 T1897$14.95 Add to Cart
Triumph 500 T100 Kickstarter With Rubber Long Type PN# 57-4760 57-2330 T4760 T2330$59.95 Add to Cart